Pavers : Tri Appia

Urban and Commercial Collection

Beauty and flexibility!

The Tri Appia paver is designed for urban zones: roads, intersections, crosswalks, parking or storage areas, and parks. Its thickness makes it ideal for high-traffic areas.

Tri AppiaTM, its aged appearance and choice of colors lends a European flair to urban environments. The installation using the runner pattern is very quick and the combination of the three different sizes reduces the need for cutting to a minimum.

Advantageous Qualities!
-100 mm thickness optimizes the transfer of heavy vehicle loads to the infrastructure and improves resistance to bending
-Highly resistant to the frost cycle, abrasion, and compression
-Facilitates access to underground services
-Roadway can be used immediately after installation

Consult this product documentation

Colors

Limestone Gray	Sandstone Beige	Terracotta Brown	Red Garnet

Geometric characteristics

Nominal Dimensions (IN.)

4 x 4 15/16 x 7 7/8 in.	4 x 4 15/16 x 9 7/8 in.	4 x 4 15/16 x 11 13/16 in.

Dimensional tolerances
The following dimensional tolerances are permitted under the CSA A231.2 standard :
Length : ± 1/16 in. (-1 mm à 2 mm)
Width : ± 1/16 in. (-1 mm à 2 mm)
height : ± 1/8 in.(± 3 mm)

Paver weight: 46.7 lbs/pi2 (228 kg/m2)

Physical characteristics

Compressive strength* : 7250 Psi (50 MPa)

Freeze-thaw resistance with use of de-icing salt* :
Maximum mass loss in a saline solution (NaCl 3%) :
0.74oz /pi2(225 g/m2) after 28 cycles
1.64oz /pi2(500 g/m2) after 49 cycles

Water absorption : 5% maximum

Specification article

Include the following article in Part 2 - Products of section 02751 - Prefabricated Concrete Pavers. It permits the specification of Bolduc pavers as a surface covering and lists the requirements for geometric and physical characteristics. It also indicates the dimensions and color of the selected paver.

PART 2 - PRODUCTS
2.1 Concrete paver
    1. Concrete paver compliant with CSA A231.2 standard
        and the following requirements
    2. Tri Appia paver supplied by Bolduc :
        1. Thickness : 3 15/16 in.(100 mm)
        2. Nominal dimensions : 4 x 4 15/16 x 7 7/8, 9 7/8, 11 13/16 in.
        3. Colors : __________________________

* Tests according to CSA A231.2